Double sheet bend; but it’s fine?

Setting up your Prusiks for Lightweight Rescue

Why is a sling 2x the strength of a single strand?

Lightweight Jigger Testing

Webbing anchors: efficient rigging and 16mm testing

Testing the Figure-8 Device Block for Canyoning

Canyon Rope Rescue Testing

Rock Thread and V-thread Testing 2021

Webbing in hangers

Back-tie rigging – tension and compression forces

Let’s lighten the load – update

Floating anchors: But what if the anchor blows?

Which bends for joining ropes? – Update

How much friction for your device?

Life on the edge: testing the edge kit

Time to meat human anchors

Forces on an inclined plane and Tippy the tip truck

Pulley system progression

Vlad to help – a master carabiner

The Perfect Storm

Jigger Setup: Troubleshooting

Progress Capture Testing for a jigger

Lightweight systems – testing to the next level

Lightweight rope rescue setup

The American Death Triangle in the real world

Mechanical rescue belay for 10mm rope?

Deploying the rope for a big canyon pitch

The American Death Triangle and driving on the wrong side of the road

Ice Anchor Testing Fox Glacier

Baseline testing for lightweight rope rescue

Let’s lighten the load

Double Fisherman’s vs Overhand Rethread

Sheet Bend vs Bowline Knot

Build a 9:1 pulley system with a Jigger

Rig a big canyon pitch

When anchor acronyms go bad

Get more friction with a double Munter

More and more about less and less

What is your risk priority?

Pulley versus carabiner efficiency

6 Training Tools for Instructors

Safety information: Engaging your staff

Which bends for joining ropes?

Anchor rigging: Getting a grip on pre-tensioning

Abseiling: 5 ways to improve

3-point anchor testing

Snow Anchor Placement

Rigging Myths and other things rope

Knots Safety Check

Systems Analysis: When does 1 = 4.5

Soil Anchor Report

Rope Grab Test Report

Snow Anchor Report

Pulley Systems 101